IBM Tivoli Network Manager IP Edition V3.9 Implementation (000-565) Free Practice Test

Question 1

During a deployment, a customer has identified location data that they would like added to both chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and passive (traps, syslog etc.) event sources.
This data has been successfully imported into the Discovery process using supported stitching techniques and appears in the topology as three custom Extralnfo fields (see below).
Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM database table named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) to reduce the NCIM load.
The customer has identified three ObjectServer fields that they would like this data :o be added to for all suitable events-NmosGeography, NmosCountry, and NmosSite

Example record in Model Description of the ncim.locations table

The ModelNcimDb cofiguration has been modified to map:

Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo > m_Geogrpahy location data and then update the NmosGeography ObjectServer field?
Assume that a chassis and locationData Records have been defined and the mainNodeld is set to the Entityld of the chassis of the in scope event.
Example:
Record chassis;
Record locationData.
text geog-'.
chassis = GwEntityData( mainNodeld);

A. NmosGeography = eval(text, '&8<Extralnfo->m_Geography'); GwEnrichEvent (NmosGeography);

B. [email protected]_Geography; @locationData.NmosGeography = geog; GwEnrichEvent(locationData);

C. [email protected]; @locationData.NmosGeography = geog. GwEnrichEvent( locationData);

D. NmosGeogrpahy = @chassis.locations.GEOGRAPHY; @locationData.NmosGeography = eval(text, '$NmosGeography'); GwEnrichEvent (locationData);

Correct Answer: C

Question 2

A customer uses an out-of-band management network for discovery and direct management of their devices.
Which scope options should be selected to enablethis?

A. Both the in-band and out-of-band addresses should be scoped and seeded as usual.

B. This cannot be scoped properly through the ScopeProperties dialog. Additional configuration is required in the DiscoScope scope.special configuration section.

C. The out-of-band network should be scoped through the Scope Properties dialog but should not be added to the Seed List (uncheck the Add to PingSeed List option).

D. The in-band scope should be added as usual and the out-of-band addresses should be explicitly excluded.

Correct Answer: B

Question 3

An administrator is adding anew table to hold some customer data in NCIM. Which table does this additional table need to be linked to (using entityId) to ensure that the data is properly displayed and managed?

A. Interface

B. Entity

C. Chassis

D. Entity Data

Correct Answer: D

Question 4

The IBM Tivoli Network Manager IP Edition V3.9 administrator is asked to create a network path between two devices on a wide area network. What does the administrator need to do to determine why a path cannot be built?

A. ensure that each device in the path has ICMP requests enabled

B. ensure that routing tables exist in the mibRouting table for the NCIM topology database

C. confirm that Ping-verify Each Hop is checked

D. confirm that Ping-verify Each Hop is unchecked

Correct Answer: C

Question 5

Which step is required for setting up NCIM replication?

A. in Configltnm.cfg.set the value of Is Replicating Ncimto 1

B. in ServiceData.cfg, add a line such as: SERVICE: ncim DOMAIN: VIRTUAL ADDRESS:
127.123.209.55 PORT: 1234 SERVERNAME: my host name DYNAMIC: NO

C. in Configltnm.cfg, set both primaryand backup to point to the same NCIM

D. in CtrlServices.cfg, set the value of ReplicateNcimto 1

Correct Answer: A

Question 6

By default, which three fields are used by the event gateway to link an event to a topology entity? (Choose three.)

A. @LocalNodeAlias

B. @Identifier

C. @Class

D. @bEventld

E. @LocalPriObj

F. @Node

Correct Answer: A,D,E

Question 7

IBM Tivoli Network Manager IP Edition V3.9can create right-click tools from the topology display. Which two steps need to be taken to enable this functionality? (Choose two.)

A. determine which fields from alerts.status will be sent as arguments to the tool

B. create the HTML page for the scripted tool page

C. create the CGI script that will launch for the tool

D. edit the tooland menu XML configuration files to incorporate the tool

E. determine the users and security context for those who will be using the tool

Correct Answer: D,E

Question 8

What is the maximum number of OIDs that can be presented in any one MIB browser?

A. 4

B. 3

C. 1

D. 2

Correct Answer: D

Question 9

A customer wants to add some logic around specific IBM TivoliNetwork Manager IP Edition V3.9 poller generated events. Where would an administrator put this logic?

A. modify the nco_p_ncpmonitor rules file to include the required logic

B. change the EventGatewaySchema.cfg configuration file to prevent the events from reaching the ObjectServer

C. add an exception filter clause to the ncmonitor.noEvent table

D. modify the ncp_poller event generation ruleset to prevent the events from being sent

Correct Answer: A

Question 10

When configuring a new agent definition, what does the command DiscoAddTagsnmpGetNext ("SubnetworkName") do?

A. It creates an additional text field in the scratchTopology.entityByName which stores the retrieved value for the SubnetworkName.

B. It creates an additional list field (type text) in the scratchTopology.entityByName which stores the retrieved table values for the SubnetworkName.

C. It creates a text field under the Extralnfo column which stores the retrieved value for the SubnetworkName.

D. It creates a list (type text) field under the Extralnfo column which stores the retrieved table values for the SubnetworkName.

Correct Answer: D

Welcome to TestSimulate

IBM Tivoli Network Manager IP Edition V3.9 Implementation (000-565) Free Practice Test