EMC Dell PowerEdge Operate v2 (D-PE-OE-01) Free Practice Test
Question 1
In which Dell EMC PowerEdge server generation was the BOSS card introduced?
Correct Answer: A
Question 2
A remote technician needs to update the iDRAC with Lifecycle Controller firmware using the iDRAC GUI. They have downloaded the iDRAC firmware to the management station and connected to the iDRAC GUI.
What step is required to complete this task?
What step is required to complete this task?
Correct Answer: A
Question 3
A technician completes initial system configuration of a server. They need to set up automated, proactive support without requiring a systems management console.
Which tool does the technician need to install?
Which tool does the technician need to install?
Correct Answer: B
Question 4
A technician receives a new server with five drives. They need to configure the drives based on the following requirements received from the administrator:
* Drive 0 as a single disk with no RAID
* Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5 The administrator plans to add more disks as separate RAID arrays at a later date but only wants drive 4 to be available for this first RAID 5 set.
How should the technician configure the drives?
* Drive 0 as a single disk with no RAID
* Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5 The administrator plans to add more disks as separate RAID arrays at a later date but only wants drive 4 to be available for this first RAID 5 set.
How should the technician configure the drives?
Correct Answer: B
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 5
SIMULATION
Using the iDRAC UI, generate and save locally a SupportAssist collection with system information and debug logs only.
Using the iDRAC UI, generate and save locally a SupportAssist collection with system information and debug logs only.
Correct Answer:
Answer in Explanation
Explanation:
To generate and save a SupportAssist collection with system information and debug logs only in theiDRAC UI, follow these steps:
Step-by-Step Guide:
Access SupportAssist in iDRAC:
In the iDRAC interface, navigate to the Maintenance tab in the top menu.
From the dropdown, select SupportAssist. This will bring up the SupportAssist options.
Initiate a Collection:
In the SupportAssist section, look for the option to Create a New Collection or Start a Collection. Choose Collect System Data or Generate a Collection, depending on the version of iDRAC.
Select Collection Components:
When prompted to select components for the collection, check the boxes for System Information and Debug Logs only.
Ensure no other components are selected to limit the collection to just the required data.
Start the Collection:
Confirm your selection, then click Start or Generate. This will initiate the process to gather thespecified data from the system.
Save the Collection Locally:
Once the collection is complete, you should see an option to Download or Save the file.
Click the download link and save the collection file locally on your computer.
Verify the Collection File:
Check the downloaded file to ensure it contains only the system information and debug logs. It should be in a format such as ZIP or TAR, depending on the system configuration.
By following these steps, you can successfully generate a SupportAssist collection with just the system information and debug logs and save it to your local system for further review or support purposes.
Explanation:
To generate and save a SupportAssist collection with system information and debug logs only in theiDRAC UI, follow these steps:
Step-by-Step Guide:
Access SupportAssist in iDRAC:
In the iDRAC interface, navigate to the Maintenance tab in the top menu.
From the dropdown, select SupportAssist. This will bring up the SupportAssist options.
Initiate a Collection:
In the SupportAssist section, look for the option to Create a New Collection or Start a Collection. Choose Collect System Data or Generate a Collection, depending on the version of iDRAC.
Select Collection Components:
When prompted to select components for the collection, check the boxes for System Information and Debug Logs only.
Ensure no other components are selected to limit the collection to just the required data.
Start the Collection:
Confirm your selection, then click Start or Generate. This will initiate the process to gather thespecified data from the system.
Save the Collection Locally:
Once the collection is complete, you should see an option to Download or Save the file.
Click the download link and save the collection file locally on your computer.
Verify the Collection File:
Check the downloaded file to ensure it contains only the system information and debug logs. It should be in a format such as ZIP or TAR, depending on the system configuration.
By following these steps, you can successfully generate a SupportAssist collection with just the system information and debug logs and save it to your local system for further review or support purposes.
Question 6
Refer to the exhibit.
A technician it installing an OS to a server. The OS array is 2.8TBs. The OS install is unable to start. What should the technician do to install the OS?
A technician it installing an OS to a server. The OS array is 2.8TBs. The OS install is unable to start. What should the technician do to install the OS?
Correct Answer: C
Question 7
A technician is troubleshooting a rackmount server that is NOT displaying video.
The technician has the following information:
- Known good monitor does NOT work when plugged into the front VGA port
- The power button is on
- iDRAC has an enterprise license
- The "i" button is blue
- NO operating system is installed on the server
Which two steps should the technician take to troubleshoot the issue?(Choose two.)
The technician has the following information:
- Known good monitor does NOT work when plugged into the front VGA port
- The power button is on
- iDRAC has an enterprise license
- The "i" button is blue
- NO operating system is installed on the server
Which two steps should the technician take to troubleshoot the issue?(Choose two.)
Correct Answer: A,E
Question 8
A technician is installing Windows Server 2016 on a server with RAID 1 and RAID 5 virtual disks.
How should they configure the server and deploy the OS?
How should they configure the server and deploy the OS?
Correct Answer: C
Question 9
A technician needs to use the iDRAC GUI to update the server using a custom repository hosted on an internal anonymous FTP. The technician receives an error message when trying to update. Catalog.xml not found.
What should the technician do to run updates?
What should the technician do to run updates?
Correct Answer: B