Dell PowerEdge MX Modular Deploy 2023 Exam (D-PEMX-DY-23) Free Practice Test

Question 1

Refer to the exhibit.

A customer recently replaced all the dual-port network cards in mezzanine A with quad-port network cards across all 16 PowerEdge MX740c sleds in the two-chassis configuration. The customer can only access half of the network ports, even though the quad-port cards are visible in the iDRAC.
What actions are required to resolve the problem?

A. Reboot the switches.
Adjust the switch configuration to use the new ports.

B. Do a virtual reseat of all the MX740c sleds.
Update the firmware on all the quad port network cards.
Adjust the switch configuration to use the new ports.

C. Install a new 200G cable from port 3 on the MX7116n in chassis 2 slot A1 into port 19 on the MX9116n in chassis 1 slot A1.
Do the same for the switches in slots A2.
Adjust the switch configuration to use the new ports.

D. Reseat all the switches.
Adjust the switch configuration to use the new ports.

Correct Answer: C

Question 2

A customer would like to periodically change the iDRAC root password on all the servers in their MCM Group.
What feature in OME-M should they use?

A. SupportAssist

B. Resource Pools

C. Chassis Deployment Wizard

D. Quick Deploy

Correct Answer: D

Question 3

Which two-socket PowerEdge sled can support up to eight E3.s NVMe Gen 5 SSD drives?

A. MX760c

B. MX750c

C. MX740c

D. MX840c

Correct Answer: A

Question 4

What configuration is supported for a fully populated MX740c compute sled?

A. 1 Fabric A mezz card
1 Fabric B mezz card with Fabric C being integrated into the system board

B. 2 Fabric A mezz cards 2 Fabric B mezz cards
2 Fabric C mini-mezz cards

C. 1 Fabric A mezz card 1 Fabric B mezz card
1 Fabric C mini-mezz card

D. 1 Fabric B mezz card
1 Fabric C mezz card with Fabric A being integrated into the system board

Correct Answer: C

Question 5

What is the port configuration of the MX9116n FSE?

A. 16 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

B. 32 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

C. 16 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

D. 32 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

Correct Answer: A

Question 6

What are the required components for a PowerEdge MX7000 Minimum to POST configuration?

A. One power supply unit
One compute sled
One input output module
One management module
Two front fans and two rear fans

B. Two power supply units
One compute sled
One input output module
One management module
Four front and five rear fans

C. Two power supply units
One compute sled
One input output module
Two management modules
Five front fans and four rear fans

Correct Answer: A

Question 7

In addition to one compute sled, one management module, and one IOM, what is the minimum required HW configuration on the PowerEdge MX7000 to POST?

A. 2 power supply units
4 front cooling fans
5 rear cooling fans

B. 3 power supply units
4 front cooling fans
5 rear cooling fans

C. 1 power supply unit
2 front cooling fans
3 rear cooling fans

D. 1 power supply unit
1 front cooling fan
1 rear cooling fan

Correct Answer: A

Welcome to TestSimulate

EMC Dell PowerEdge MX Modular Deploy 2023 (D-PEMX-DY-23) Free Practice Test