A. Reserved for internal purposes. Not in use

B. 1Gbps connectivity for Security Groups

C. Two Out-of-band interfaces for access to Orchestrator itself

D. Out-of-band interface for access to Orchestrator itself and Serial Console connector

A. Clish commands are for testing purposes only and cannot be saved, gClish commands apply to all SG members, by default.

B. Clish commands are run on the SG members. gClish commands are run on the MHO and applied to all connected SG members in a specified group.

C. Clish commands apply only to a specific SG member. gClish commands apply to all UP SG members, by default.

D. Clish commands apply to all UP SG members, by default. gClish commands apply to all SG members, by default.

A. Additional ports used as uplinks

B. Reserved for internal purposes. Not in use.

C. 1Gbps connectivity for Security Groups

D. Out-of-band interfaces for access to Orchestrator itself

A. g_update_kernel

B. g_update_conf_file

C. g_all update_conf_file

D. vi

A. Monitoring Check Point code drops

B. Showing the system temperature in real-time for multiple components, such as CPU, fan, and SSDs.

C. Viewing all interface drops such as RX-ERR, RX-DRP, and RX-OVR

D. Viewing all drops by Check Point code or the Gaia OS, such as RX-DRP, RX-ERR, and Gaia OS drops.

A. The load-balancing mechanism used by the MHO.

B. Enforces the access policy on the SGMs and synchronizes the enforcement verdict to other SGMs in the SG.

C. Ensures asymmetric traffic is handled properly, especially in the case of NAT or VPNs.

D. The MHO's distribution algorithm which determines the handling SGM for a given connection.

A. Collects traffic dump from all Active Appliances within Security Group

B. The same as tcpdump, just on Scalable Platform

C. Collects traffic dump from CIN network

D. Collects traffic dump from Sync network

A. SFP, QSFP, QSFP28

B. SFP, SFP+, QSFP, QSFP28

C. SFP+, SFP28, QSFP

D. SFP, SFP+, SFP28

A. Ports 1 - 4 are Management ports.

B. Ports 49 - 55 are Management ports.

C. Ports 5 - 26 are Management ports.

D. Ports 27 - 47 are Management ports.