Certified Wireless IoT Solutions Administrator(2025 Edition) (CWISA-103) Free Practice Test

Question 1

A Wi-Fi enabled weight scale is an example of what kind of health IoT device?

A. wearable

B. non-wearable

C. implantable

D. injectable

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 2

You are planning a wireless implementation. At what point should you begin to consider security requirements for the implementation?

A. In the acceptance testing phase

B. In the planning phase

C. In the implementation phase

D. During hand-off to support

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Within what development environment is XAML most commonly used?

A. Python

B. .NET

C. PHP

D. R

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

What does the number in the various Quadrature Amplitude Modulation levels, such as 16 in QAM- 16 and 64 in QAM-64, indicate? (Choose the single best answer.)

A. The number of target points in the QAM constellation, which are equivalent to amplitude and phase combinations

B. The speed of data transfer, which is four times the number in the QAM level

C. The channel width, which is stipulated in MHz

D. The number of spatial streams, which is 1/4 the number in the QAM level

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

In a Wi-Fi IoT deployment, which factor MOST affects the number of devices that can be supported by a single access point?

A. The SSID name length

B. Channel width and airtime utilization

C. The Ethernet cable type used

D. The DHCP lease time

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

You are deploying a ZigBee network based on the frequency band available for ZigBee deployment worldwide. What allowable action will do the most to minimize ZigBee and 802.11 interference?

A. Use the 6 GHz band for all ZigBee communications

B. Use the 2.4 GHz band for all 802.11 communications

C. Use the 5 GHz band for all ZigBee communications

D. Use the 5 GHz band for all 802.11 communications

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

What is an advantage of an overlay monitoring system for wireless networks as opposed to an Integrated monitoring system?

A. An overlay solution is less expensive than an integrated solution

B. An overlay solution collects less data so that reporting is more efficient

C. An overlay solution functions without disrupting services provided by the wireless network

D. An overlay solution does not require power provisioning

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

You have implemented a wireless mesh network. All mesh nodes are properly configured for participation in the same mesh network. Several of the mesh nodes are unable to connect to other mesh nodes. What action may provide a solution to this problem?

A. Change the security settings on the faulty mesh nodes

B. Place the faulty mesh nodes in their own mesh network

C. Move the faulty mesh nodes to provide for better signal strength

D. Change the output power settings only on the faulty mesh nodes

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 9

What is an important acceptance agreement to achieve in the final customer meeting for a wireless IoT deployment?

A. Stakeholder acceptance

B. Support for wearable IoT solutions

C. Power supply provisioning

D. Scope definition

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Welcome to TestSimulate

CWNP Certified Wireless IoT Solutions Administrator(2025 Edition) (CWISA-103) Free Practice Test