Certified Technology Specialist - Installation (CTS-I) Free Practice Test

Question 1

The different distributions of white light sources means that each white light_____.

A. has a different tint

B. is perceived in different ways

C. is exactly the same

D. illuminates the same way

Correct Answer: A

Question 2

_____ are required when multiple video sources must be displayed on different video displays, or in different zones.

A. Looping schemes

B. Thunderbolt adapters

C. Matrix routing switchers

D. HDMI repeaters

Correct Answer: C

Question 3

The two Ethernet standards for an 8-pin modular connector (sometimes called an RJ45) termination are:

A. T568A and T568B

B. E423A and E423B

C. RJ45B and RJ11A

D. RJ45A and RJ45B

Correct Answer: A

Question 4

Which of the following is an essential deliverable before sign-off?

A. Redundant cables

B. A punch/snag/problem list

C. A clean site

D. Referral solicitations

Correct Answer: C

Question 5

Why should you avoid coiling power cables within a rack?

A. Coiled cables can make it difficult to service a rack.

B. A coiled cord can become permanently kinked.

C. Coiling power cords create a powerful electromagnetic field, which interferes with lower signal levels.

D. Coiled cables don't look very tidy in a finished rack.

Correct Answer: C

Question 6

In a _____ loudspeaker circuit, you will connect a positive wire from an amplifier to another positive wire on each of the loudspeakers in the circuit.

A. Series

B. Parallel

Correct Answer: B

Question 7

This conduit type forms a lightweight continuous flexible tube that offers the advantage of EMI protection.

A. Thinwall

B. PVC

C. Flex

D. Rigid

Correct Answer: C

Question 8

What is a dependency within a project task schedule?

A. An optional task that the client can determine is needed once the project is underway

B. A task that will be required if specific conditions occur at the project site

C. A task that cannot begin before another task has been completed

D. A task that must be completed by a specific date

Correct Answer: C

Question 9

Audio Conferencing equipment makes use of acoustic_____ technology.

A. doppler

B. phase shift

C. reverberation

D. echo-cancellation

Correct Answer: D

Question 10

A customer has recently changed their phone system from a traditional POTS line to VoIP based switch. The new VoIP switch still dials out properly, but no longer hangs up when the far end disconnects. What is most likely the problem?

A. The far-end disconnect signal is not being received

B. The VoIP switch is not configured properly

C. The hybrid is set to "voice disconnect"

D. The on-hook voltage is too high, and the hybrid is set to "loop drop"

Correct Answer: D

Welcome to TestSimulate

AVIXA Certified Technology Specialist - Installation (CTS-I) Free Practice Test