Building HPE FlexFabric Data Centers (HP2-Z34) Free Practice Test

Question 1

How does a non-hierarchical VPLS Martini solution prevent looping for broadcasts and multicasts?

A. PEs implement a version of Spanning Tree Protocol (STP). preferably Multiple STP (MSTP).

B. PEs use split horizon operations, never forwarding a packet received on a pseudo wire (PW) over another PW.

C. PEs implement Shortest Path Bridging (SPB) VLAN Mode (SPBV).

D. PEs use a hub and spoke topology, relying on the hub to distribute broadcasts and multicasts.

Correct Answer: B

Question 2

An administrator is configuring an HP switch to run SPBM. Which Spanning Tree Protocol (STP) configuration is required?

A. Map all B-VLANs to MSTP instance 4092

B. Set the spanning tree mode to ECT.

C. Ensure that the switch with the lowest IS-IS router ID has the lowest bridge priority.

D. Disable STP.

Correct Answer: A

Question 3

An administrator configures an HP Comware switch to support FCoE in Fibre Channel Forwarder (FCF) mode A switch interface connects to a server FC host bus adapter (HBA).What is the correct configuration for this port?

A. bound to a VFC interface, which is in F mode

B. FC port >n F mode

C. FC port in NP mode

D. bound to a VFC interface, which is in E mode

Correct Answer: D

Question 4

What is the relationship between a Forwarding Equivalence Class (FEC) and the MPLS label that a Label Switching Router (LSR) advertises for that FEC?

A. The LSR assigns a unique label to each FE and that label remains constant across the MPLS domain

B. An LSR assigns the same label to FECs with the same best next hop; labels assigned by different LSRs do not necessarily match

C. The LSR assigns a unique label to each FEC, but labels assigned by different LSRs do not necessarily match.

D. An LSR assigns the same label to FECs with the same best next hop: labels remain constant across the MPLS domain

Correct Answer: B

Question 5

An administrator configures two VSANs on an HP Comware IRF virtual switch. The IRF members connect to a server with two Converged Network Adapters (CNAs) One CNA is connected to VSAN 1. and the other is connected to VSAN 2 The storage target for the server is also connected to VSAN 1 and VSAN 2.
What is required for this setup to work?

A. The HP switch must place the ports connected to the server CNAs in a link aggregation set to dynamic (LACP) mode

B. The server CNAs must support multi-path I/O (MPIO)

C. The HP switch must place the ports connected to the server CNAs in a link aggregation set to static mode

D. The HP switch must support multi-path I/O (MPIO).

Correct Answer: C

Question 6

Refer to the exhibit

An administrator is configuring an MPLS VPLS Martini solution on PE-1. The VPLS solution should connect customer A sites 1, 2, and 3 Where should the administrator specify the LDP peers and pseudo wire (PW) label for the PWs?

A. in service instances on interfaces Ten2/0/1 and Ten2/0/2

B. in a global cross-connect group

C. in a service instance on interface G1/0/1

D. in a Virtual Switch Instance (VSI) for customer A

Correct Answer: A

Welcome to TestSimulate

HP Building HPE FlexFabric Data Centers (HP2-Z34) Free Practice Test