BIG-IP LTM Specialist: Architect Set-Up & Deploy (301a) Free Practice Test

Question 1

An application requires load balancing functionality. The application must be encrypted to the client.
Certain content must be manipulated by the following IRule:

Which set of profiles must be applied to the virtual server?

A. Fast L4, HTTP server SSL Stream

B. TCP, HTTP, OnceConnect, Stream

C. TCP, HTTP, Client SSL, Stream

D. TCP, HTTP server SSL Stream

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 2

An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled. TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool. TLS enabled virtual servers utilize certificates based on 2048-bit keys.
During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?

A. 2060 new TLS transactions will be silently discarded due to the SSL TPS license limit

B. 560 new TLS transactions will be silently discarded due to the SSL TPS license limit

C. Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit

D. Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.

Correct Answer: B

Question 3

An application is making heavy use of a large, high-quality JPEG image file.
An LTM Specialist needs to enhance page load times without increasing server load.
Which profile should be applied to the virtual server to perform this task?

A. FastHTTP

B. Response Adapt

C. OneConnect

D. Web Acceleration

Correct Answer: D

Question 4

AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?

A. The value for Manual Resume is set to Yes

B. The parameter Time Until UP has a value greater than 0

C. The value of Manual Resume is set to No

D. The value for UP interval is enable with a value greater than 0

Correct Answer: A

Question 5

An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG- IP device to the device group.
The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?

A. HA Group

B. Ordered List

C. Load Aware

D. HA Capacity

Correct Answer: B

Question 6

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.
What are the required profile and persistence settings for a standard virtual server?

A. tcp, ftp - Source address persistence

B. tcp, clientssl, serverssl persistence

C. tcp, ctientsst, ftp serverssl persistence

D. tcp - no persistence profile will be used

Correct Answer: A

Question 7

An LTM device load balances a pool of routers.
The LTM device needs to verify path availability to an HTTP server with the IP address
192.168.10.10. located beyond the routers.
Which monitor type and parameters arc required?

A. TCP monitor change transparent option to Yes, set alias address 192.168.10.10. and set the alias to port 80

B. TCP monitor, alias address 192.168.10.10 and set the alias to port 80

C. HTTP monitor alias address 192.168.10.10 and set the alias to port 80

D. TCP monitor, change transparent option to Yes, and sot the alias to port 80

Correct Answer: A

Question 8

An application is being load balanced through the LTM device using the configuration displayed below.
The network has been re-engineered to NAT all client connection. As a result, all client connections are hitting the same pool member.

Which changes should the LTM Specialist make in order to restore load balancing functionality wile maintaining session persistence?

A. Leave the virtual server type set Performance (Layer 4) and change the persistence type to hash

B. Change the virtual server type to Standard, add an http profile, and change the persistence profile to Destination Address

C. Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to hash source Address

D. Change the virtual server to Standard add an http profile, and change the persistence profile to Cookie persistence

Correct Answer: D

Question 9

Refer to the exhibit.

An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?

A. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}

B. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102
254)}

C. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip

D. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10
208.102.254 }}

Correct Answer: C

Question 10

Where does a LTM Specialist view all of the objects that are part of a deployed iApp?

A. Local Traffic > Network Map > View Map

B. iAPP> Application Policy > Objects

C. Local Traffic . Virtual Servers > Applications

D. IAP > Application Service > Components

Correct Answer: D

Question 11

Refer to the following iRule:

What is a complete list of profiles that must be applied to the virtual server for this iRule?

A. TCP, HTTP, Client SSL

B. Fast L4, HTTP

C. Fast L4 , HTTP, Stream

D. TCP, HTTP

Correct Answer: D

Question 12

An ITM Specialist has the configuration shown:

The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?

A. 10.120.0.1 only

B. 10.90.0.1 and 10.12.0.1

C. 10.100.0.1 and.10.120.0.1

D. 10.90.0.1 and 10.100.0.1

Correct Answer: C

Welcome to TestSimulate

F5 BIG-IP LTM Specialist: Architect Set-Up & Deploy (301a) Free Practice Test