BICSI Installer 1 Exam (IN101_V7) Free Practice Test

Question 1

If you are working on a catwalk, you are required to wear _____?

A. Full body harness and two lanyards

B. Safety belt

C. Nothing, your fine on the catwalk

Correct Answer: A

Question 2

Which of the following is used to perform continuity and length tests for coaxial cable?

A. OLTS (optical loss test set)

B. TDR (Time domain reflectometer) with an adapter

C. VFL (visual fault locator)

D. OTDR (optical time domain reflectometer

Correct Answer: B

Question 3

Electrical power (P) is measured in ___________?

A. Watts

B. henries

C. Ohms

D. Farads

Correct Answer: A

Question 4

Which of the following must be measured before the length of a coaxial cable can be calculated?

A. Delay skew

B. DC loop resistance

C. Propagation delay

D. Insertion loss

Correct Answer: B

Question 5

What is the maximum permissible amount of untwisting for category 5e cable and higher?

A. 12.7 mm (0.5")

B. 75 mm (3")

C. 38 mm (1.5")

D. 25 mm (1")

Correct Answer: A

Question 6

Which of the following refers to a set of rules issued by a governmental body at the state level within the US?

A. Regulations

B. Best Practices

C. Applications

D. Guidelines

Correct Answer: A

Question 7

What is the minimum inside bend radius for balanced twisted pair (multi-pair) cable?

A. 6 times the outside cable diameter

B. 50 mm (2")

C. 10 times the outside cable diameter

D. 25 mm (1")

Correct Answer: C

Question 8

Which of the following describes a nonmechanical firestop system that forms a hard char when exposed to flame?

A. Intumescent

B. Endothermic

C. Elastomeric

D. Ablative

Correct Answer: D

Question 9

A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?

A. Simplex

B. Half-duplex

C. Full-duplex

Correct Answer: A

Welcome to TestSimulate

BICSI Installer 1 (IN101_V7) Free Practice Test