Avaya ERS 8000 and Avaya VSP 9000 Implementation Exam (6103) Free Practice Test

Question 1

A port on the Virtual Services Platform (VSP) 9000 is down because of a link_flap condition as shown in the following output:
VSP-9012:1#show interfaces gigabitEthernet state 10/8 ================================================================ Port State ================================================================ PORT NUM ADMINSTATUS PORTSTATE REASON DATE
10/8 up down LINK-FLAP 10/28/10 00:22:50
What is the most likely cause?

A. One side of the connection is configured for auto-negotiation and the other side is a fixed speed.

B. The spanning tree protocol has detected a loop and placed the port in a blocked state.

C. There is a physical problem, such as a cable problem.

D. The port is receiving a large number of destination unknown broadcast packets.

Correct Answer: D

Question 2

After configuring your VSP 9000 for web access, engineers on the team says that they cannot log into EDM using their credentials.
What are the default credentials for EDM?

A. username: admin password: <blank>

B. username: avaya password: avaya

C. username: rwa password: rwa

D. username: admin password: password

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Which two management ports are available on the VSP 9000 CP module? (Choose two.)

A. Serial interface

B. Modem interface

C. USB (host) interface

D. Ethernet interface

Correct Answer: A,D

Question 4

SMLTv2 is introduced with the Virtual Services Platform (VSP) 9000, and is easier to configure than SMLTv1.
What is a requirement for SMLTv2?

A. RSMLT IDs must be globally unique on a VSP 9000 cluster.

B. SLT IDs must be globally unique on a VSP 9000 cluster.

C. SMLT IDs must be globally unique on a VSP 9000 cluster.

D. MLT IDs must be globally unique on a VSP 9000 cluster.

Correct Answer: D

Question 5

The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a VRRP address was unsuccessful.
What is causing this problem?

A. The virtual router identifier is 0.

B. The incorrect MAC offset is configured for the VRRP address.

C. The datacenter interface is set as a critical IP interface.

D. A real IP address is required for management access not a VRRP address.

Correct Answer: D

Question 6

After issuing a show mlt ist stats (CLI) or show ist stat (ACLI) command, it is determined that the running type is normal MLT and not IST.
What are two causes of the IST not running properly? (Choose two.)

A. The peer IP addresses have to be 192.168.1.1/30 and 19 2.168.1.2/30.

B. The MLT ID does not match on both switches.

C. The peer IP address is not the address of the peer switch IST VLAN.

D. The IST is not enabled on both switches.

Correct Answer: C,D

Question 7

Once you have enabled the web server within the system for EDM access, what is the syntax to allow only secure connections?

A. web-server secure enable

B. web-server ssh session only

C. web-server ssh enable

D. web-server secure-only

Correct Answer: D

Welcome to TestSimulate

Avaya ERS 8000 and Avaya VSP 9000 Implementation (6103) Free Practice Test