Avaya Aura(TM) Communication Manager (R5.2.1) Implementation Exam (6006.1) Free Practice Test

Question 1

Before IPSI cards can become active on a new Communication Manager system, which screen must be accessed to enable IPSI control of the port networks?

A. System-parameters IP Server-interface

B. System-parameters IPSI-option

C. System-parameters IP-options

D. System-parameters port-networks

Correct Answer: A

Question 2

Which command is used to tell at what time a spontaneous interchange has taken place?

A. List history

B. Display initcause

C. List usage

D. Status health

Correct Answer: B

Question 3

When configuring the LSP/SLS on Media Gateways, the gatekeeper information needs to be administered so that stations register to the gateway during a WAN outage.
How would this be accomplished?

A. In Cm administer the 'system-parameter mg-recovery-rule [#]' and identify the station.

B. In CM use the 'change station' command and set the field 'Survivable Trunk Dest'? to Y

C. In CM use the 'change station' command and input the node of the gateway for the field for 'Survivable GK Node Name'

D. In CM use the 'change station' command set 'Survivable COR' to Y.

Correct Answer: A

Question 4

During the initial configuration of a Communication Manager5.2.1 system a technician enters the wrong name for a CLAN and saves the screens.
What must be done before the name of the CLAN board can be changed/

A. Disable the interface.

B. Remove the interface

C. Reset the interface

D. Remove the IP address from the interface.

Correct Answer: A

Question 5

When administering a new Media Gateway, in which three locations is the name administered? (Choose three)

A. In Communication Manager with the command 'add Media-gateway [#]'

B. In Communication Manager with the command 'add Node-Names ip'

C. In the Gateway with the CLI command 'set system name'

D. In the Gateway with the command 'set system name'

E. In the Gateway with the command 'set system config'

Correct Answer: A,B,C

Question 6

A user would like to see a list of number of registered IP endpoints with TCP signaling sockets established for each CLAN or processor Ethernet.
Which command would be used?

A. List ip interface clan

B. Status socket-usage

C. List measurable clan sockets

D. Status clan-ip location

Correct Answer: B

Question 7

Avaya recommends that the technician checks the "Latest Communication Manager Software and Firmative Compatibility Matrix" for software not formative compatibility.
What may occur if LSPs or ESS servers are running a different software load than the main server?

A. No issue will occur because of primary controller will not attempt synchronization to LSPs or ESS servers that have incompatible software.

B. May occur split registration because of the incompatible software versions.

C. No issue will occur because of backward compatibility between the gateway and media firmware.

D. May cause transaction corruption because of the synchronization between the primary controller and the LSPs /ESS server.

Correct Answer: D

Welcome to TestSimulate

Avaya Aura(TM) Communication Manager (R5.2.1) Implementation (6006.1) Free Practice Test