Aruba Certified Campus Access Professional Exam (HPE7-A01) Free Practice Test

Question 1

What are key differences between 802.11 wireless and 802.3 Ethernet? (Select two.)

A. 802.3 allows direct device-to-device communication over wired media

B. 802.11 requires signal modulation for transmission

C. 802.3 networks require access points for device connection

D. 802.11 exclusively uses fiber optics for connectivity

Correct Answer: A,B

Question 2

Which statement is correct for the HPE Aruba Networking Analytics Engine (NAE) in VSX environment?

A. NAE is VSX aware and the python-based agents on each member device store sensor values remotely.

B. NAE is not VSX aware and the python-based agents on each member device store sensor values locally.

C. NAE is VSX aware and the ruby-based agents on each member device store sensor values remotely.

D. Each switch in the VSX pair maintains its own independent NAE agent and stores sensor values locally.

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to view nonsensitive switch configuration information and only has the GET method for REST API for all resources other than \login and \logout.
Which default AOS-CX user role meets these requirements?

A. sysadmin

B. config

C. operators

D. sysops

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

Which of the following can cause wired network connectivity issues? (Select two.)

A. Mismatched duplex settings on network interfaces

B. Enabling OSPF routing

C. Using Layer 3 switches

D. Loose or damaged Ethernet cables

Correct Answer: A,D

Question 5

You are deploying a bonded 80 MHz wide channel. What is the difference in the noise floor perceived by a client using this bonded channel as compared to an unbonded 20MHz wide channel?

A. 8dB

B. 6dB

C. 4dB

D. 3dB

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

When setting up an AOS-CX VSX pair, which information does the Inter-Switch Protocol synchronize in the configuration created?

A. SVI

B. UDLD

C. MSTP

D. RPVST+

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

You are setting up a customer's 150 headless loT devices that do not support 802.1 X. What should you use?

A. HPE Aruba Networking ClearPass profiling with WPA-PSK

B. Multiple Pre-Shared Keys (MPSK) with WPA3-AES

C. HPE Aruba Networking ClearPass profiling with MAC-AUTH

D. Multiple Pre-Shared Keys (MPSK) Local

Correct Answer: D

Question 8

What is an OSPF transit network?

A. a network on which a router discovers at least one neighbor

B. a special network that connects two different areas

C. a network that uses tunnels to connect two areas

D. a network that connects to a different routing protocol

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 9

How Multicast Transmission Optimization implemented in an HPE Aruba Networking wireless network?

A. The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.

B. The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients

C. When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz

D. The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.

Correct Answer: D

Question 10

You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?

A. Create one group in Central for switches a second group for APs. and a third group for gateways Create a unique site for each location, and assign devices to the appropriate site.

B. Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site.

C. Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site.

D. Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site.

Correct Answer: B

Question 11

Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

A. Spectrum Monitor

B. Air Monitor

C. Dual Mode

D. Hybrid Mode

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 12

A network administrator is troubleshooting some issues guest users are having when connecting and authenticating to the network. The access switches are AOS-CX switches.
What command should the administrator use to examine information on which role the guest user has been assigned?

A. diag-dump captiveportal client verbose

B. show port-access captiveportal profile

C. show aaa authentication port-access interface all client-status

D. show port-access role

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Welcome to TestSimulate

HP Aruba Certified Campus Access Professional (HPE7-A01) Free Practice Test