Aruba Campus Access Associate Exam (HPE6-A85) Free Practice Test

Question 1

What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

A. ip route 10.2.10.0.255.255.255.0 172.16.1.1 description aruba

B. ip route 10.2.10.0/24.172.16.11

C. ip-route 10.2.10.0/24 172.16.1.1

D. ip route-static 10.2 10.0.255.255.255.0 172.16.1.1

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 2

You are configuring a network with a stacked pair of 6300M switches used for distribution and layer 3 services. You create a new VLAN for users that will be used on multiple access stacks of CX6200 switches connected downstream of the distribution stack You will be creating multiple VLANs/subnets similar to this will be utilized in multiple access stacks What is the correct way to configure the routable interface for the subnet to be associated with this VLAN?

A. Create an SVl in the subnet on the 6300M stack.

B. Create an SVl in the subnet on the 6300M stack, and assign the management address of each downstream switch stack to a different IP address in the same subnet

C. Create a physically routed interface in the subnet on the 6300M stack for each downstream switch.

D. Create an SVl in the subnet on each downstream switch

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely rather than on-site You have a colleague installing the switch The colleague has provided you with a remote console session to configure the edge switch You have been asked to configure a link aggregation going back to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure the switch and 1Q uplink with these guidelines
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using LACP mode active for the uplink
4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?

A. Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut

B. Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1
/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacp
mode active interface 1/1/51.1/1/52 no shut

C. Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut

D. conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1
/51.1/1/52 no shut

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

What is the recommended VSF topology? (Select two.)

A. Ring

B. Star

C. Full mesh plus MAD

D. Daisy chain plus MAD

E. Full mesh

Correct Answer: A,D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

You need to troubleshoot an Aruba CX 6200 4-node VSF stack switch that fails to boot correctly Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

A. Member 2 switch mgmt port

B. Conductor USB-C console port

C. Member 2 RJ-45 console port

D. Conductor mgmt port using SSH

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch What is the best technology to use for this task?

A. Strict queuing

B. Rate limiting

C. QoS shaping

D. DWRR queuing

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

You need to configure wireless access for several classes of loT devices, some of which operate only with 802
11b. Each class must have a unique PSK and will require a different security policy applied as a role There will be 15-20 different classes of devices and performance should be optimized Which option fulfills these requirements''

A. Single SSID with MPSK for each loT class using 2.4GHz and 5 GHz bands

B. Individual SSIDs with unique PSK for each loT class, using 5GHz and 6 GHz bands

C. Individual SSIDs with unique PSK for each loT class, using 2.4GHZ and 5GHz band

D. Single SSID with MPSK for each loT class using 5 GHz and 6 GHz bands

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1 20 0/24, vrf default via
10.1.12.2. [1/0]"?

A. local

B. static

C. connected

D. OSPF

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 9

When using the OSPF dynamic routing protocol on an Aruba CX switch, what must match on the neighboring devices to exchange routes?

A. DR configuration

B. Hello timers

C. ECMP method

D. BDR configuration

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 10

Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

A. ip route 0 0 0.070 10.4 5.1 vrf mgmt

B. default-gateway 10.4.5.1

C. iP default-gateway 10.4.5.1

D. ip route 0.0 0 0/0 10.4.5.1

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Welcome to TestSimulate

HP Aruba Campus Access Associate (HPE6-A85) Free Practice Test