Architecting Multi-Site HPE Storage Solutions (HPE0-J79) Free Practice Test

Question 1

A customer must store backup data at a separate site from the company's main data center due to governmental regulations. The customer also needs to have rapid restores and short-term retention. Which solution allows the customer to do local backups and restores, and archive data off site for the long term?

A. HPE StoreOnce Recovery manager

B. HPE StoreEasy

C. HPE StoreVirtual VSA solution

D. HPE StoreOnce backup solution

Correct Answer: D

Question 2

The demonstration of iSCSl Persistent Ports during an HPE 3PAR StoreServ Proof of Concept fails. What is a possible cause of the failure?

A. The connected switch does not accept an unsolicited ARP and does not update the IP address mappings.

B. Port Persistence is not configured correctly preventing the partner port from being actuated in a timely manner

C. Zoning is not implemented correctly and the host could not connect to the partner port

D. The connected switch gets a loss_sync of the HPE 3PAR StoreServ port and disconnects the port immediately.

Correct Answer: A

Question 3

You are talking to a prospective customer at a medium-to-large enterprise firm about an upcoming storage refresh project they have tor their legacy architecture storage platforms. The customer mentions mat as they grew the size and types of workloads on their present storage arrays. They became slower in terms of IOPS and Ihroughpul. In a few cases, they had to purchase additional arrays to oft load some of the workload They noticed the same impact to performance when they enabled array-based replication
Which HPE 3PAR StoreSeiv architecture feature would solve these issues?

A. The shared links between the controller node and each ot the other nodes operates at 4 GB's full duplex to adequately support the clustering of controller nodes and movement of data between nodes.

B. The HPE 3PAR StoreServ storage array is an ideal nigh availability platform that runs its OS in a single instance)

C. The HPE 3PAR ASIC offloads 10 workload performed by microprocessors in legacy storage array platforms

D. The HPE StoreServ storage array uses a high-speed, full-mesh active interconnect to join multiple controller nodes together to form a cache-coherent cluster across the entire array

Correct Answer: C

Question 4

Which standard is disk encryption based on?

A. Link Encryption Control Protocol (LECP) 802.Sad

B. Advanced Encryption Standard (AES) 256

C. Secure Hashing Algorithm (SHA) 256

D. International Electrical and Electronic Engineers (IEEE) Standard 802 1 1x

Correct Answer: B

Question 5

What does Flow Control functionality provide?

A. It manages congestion by pausing Ethernet traffic.

B. It allows use of frame sizes up to 9000 bytes

C. It removes me requirement to use Spanning Tree Protocol (STP)

D. It resolves switch backplane or port oversubscription

Correct Answer: A

Question 6

You are designing a Fibre Channel storage solution for a customer who is currently attaching all hosts through the Ethernet and the TCP/IP protocol. What is an advantage of choosing Fibre Channel over TCP/IP?

A. More robust error correction

B. Less overhead

C. Less costly networking hardware

D. Support for greater distances

Correct Answer: A

Welcome to TestSimulate

HP Architecting Multi-Site HPE Storage Solutions (HPE0-J79) Free Practice Test