Architecting HP FlexNetwork Solutions (HP0-Y50) Free Practice Test

Question 1

An architect is planning an HP Wired-WLAN solution for an office with approximately 4000 users who will use the wireless network rather heavily and also need to roam seamlessly. The solution will have 256 MSM 460 access points (APs). What is one reason for using two Hp Wired-WLAN controllers for this solution?

A. The controller can be licensed and configured to provide redundancy for each other

B. The customer needs fast roaming, which requires a mobility solution between two controllers

C. Each Wired-WLAN controller can only support 128 APs

D. Each Wired-WLAN controller can only support 2000 users

Correct Answer: A

Question 2

If a network architect is planning a secure device management policy, why would administrators need to generate SSH keys on network infrastructure devices?

A. To encrypt management traffic and also authenticate managers with asymmetric

B. To authenticate managers and assign them privileges according to their identity

C. To authenticate managers with a more secure method than passwords

D. To encrypt management traffic related to the CLI

Correct Answer: D

Question 3

A network architect is designing a solution with HP products. A customer has the following requirements for controlling the management access for administrators:
Which option meets the company's requirements?

A. Authentication to a RADIUS server with local authentication as a secondary method

B. Authentication to a TACACS+ server

C. Authentication with a password that meets the complexity requirements and is stored locally on each device

D. Authentication to local user accounts with TACACS+ authenticates as a secondary method

Correct Answer: A

Question 4

Refer to exhibit.

A network architect is proposing an HP 6600 Series router at the core of this enterprise customer network. The router runs Border Gateway Protocol (BGP) and announces the customer network s to the Internet service provider (ISP). The router also runs Open Shortest Path First (OSPF) to communicate with the rest of the customer network.
What is an appropriate method for the HP 6604 router to advertise routes to the other routing switches?

A. The router should advertise BGP routes into OSPF but filter out all routes except the private network that belongs to the customer.

B. The router should advertise a default route as an Autonomous System Border Router (ASBR) summary to other routing devices in area 0.

C. The router should redistribute BGP routes into OSPF. The Area Border Routes (ABRs) should summarize those routes for the advertisement in areas 1 and 2.

D. The router should redistribute BGP routes into OSPF. Areas 1 and 2 should be configured as stub areas to filter out the external routes.

Correct Answer: D

Question 5

A network architect has planned an 802.1X solution for a company with these requirements:
The company wants to keep this solution as it is but also allow the same ports to support guest access. Instead of authenticating with 802.1X, guests should log in through a Web page hosted on UAM.
Which solution meets this requirement?

A. The ProVision switches implement hybrid ports for authentication. The switch port detects whether a connected device belongs to an employee or guest and implements either 802.1X or remote Web-Auth.

B. The ProVision switches implement 802.1X and Web-Auth on the same ports. The switches have Web pages downloaded on to them and enforce Web-Auth locally.

C. The ProVision switches do not implement authentication on their ports. The IRF virtual device implements 802.1X and Web-Auth on the links that connect to the ProVision switches.

D. The ProVision switches have a guest VLAN on the ports than enforce 802.1X. The guest VLAN extends to the IRF virtual switch, which enforces Web-Auth to UAM on this VLAN.

Correct Answer: A

Question 6

A customer plans to connect 40 Voice over IP (VoIP) phones and 8 security cameras to a switch:
What else does the solution require?

A. A management module that is PoE+ capable

B. A redundant power supply for the switch that enhances the PoE/PoE+ budget

C. A 208-220V input power service

D. A power converter that enables the switch to provide PoE and PoE+ power at the same time

Correct Answer: B

Welcome to TestSimulate

HP Architecting HP FlexNetwork Solutions (HP0-Y50) Free Practice Test