A. before defining the VLAN pool that is assigned to the VMM controller

B. after assigning the EPG to the VMM controller

C. No need to create the vDS, the Cisco APIC controller does that automatically.

D. when starting up the VM

A. topology manager

B. event manager

C. policy manager

D. policy element

E. appliance director

F. spine manager

A. Objects in the concrete model are concrete real objects that are configured by a user.

B. NXOS consumes objects from the logical model to program switch hardware with the needed networking construct, such as vlan or vrf.

C. iNXOS consumes objects from the resolved model to program switch hardware with the needed networking construct, such as vlan or vrf.

D. iNXOS consumes objects from the concrete model to program switch hardware with the needed networking construct, such as vlan or vrf.

E. Objects in the resolved model are read-only objects that are used to pass the configuration object from the Cisco APIC to the needed switches.

F. Objects in the logical model are read/write objects that are configured by a user

A. interface profile

B. attachable access entity pokey

C. switch pokey

D. vSwitch policy

A. If IPManager On the spine rejected a tenant VRF/route configuration, the spine command show ip route vrf <vrf name> can be used to verify all tenant VRF configurations.
The BD SVI IP address can be verified with the vsh_ Ic show platform internal ns forwarding router-ip command.

B. VL AN membership of an Interface can be vended wrth the VSh_lC show system Internal eltmc Info interface x/x command.

C. The VLAN membership for an interface on the Broadcom ASIC can be verified with the show hardware vlans programmed command.

D. The tcpdum command can be used on all Cisco ACI switches to capture and verity tenant EPGdata plan traffic.