Updated: Jun 07, 2026
No. of Questions: 435 Questions & Answers with Testing Engine
Download Limit: Unlimited
Our Online Test Engine & Self Test Software of TestSimulate GB0-372-ENU actual study materials can simulate the exam scene so that you will have a good command of writing speed and time. Then multiple practices make you perfect while in the real H3C GB0-372-ENU exam. The package practice version will not only provide you high-quality GB0-372-ENU exam preparation materials but also various studying ways.
TestSimulate has an unprecedented 99.6% first time pass rate among our customers.
We're so confident of our products that we provide no hassle product exchange.
1. After executing the displayinterface Ethernet 1/0/1 command on the switch SWA, the output information is as follows:
[SWA] display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0 (sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
what can we learn from the above information? (Multiple choice)
A) The data frame with VLAN1 tag will be stripped of the tag when it leaves port Ethernet1/0/1
B) Port Ethernet1/0/1 is a Trunk port, allowing data from all VLANs to pass through.
C) Data frames with VLAN 20 tags can be forwarded from port Ethernet 1/0/1
D) Data frames with VLAN10 tags will not be discarded when they enter port Ethernet1/0/1
2. Regarding the spanning tree port cost configuration of H3C switches, which of the following is correct? (Multiple choice)
A) H3C switches support three port cost standards: dot1d-1998, dot11, and legacy. The stp pathcost- standard command can be used to switch the port cost standard.
B) The default spanning tree port cost standard followed by H3C switches is legacy
C) By default, the larger the port cost value, the smaller the port bandwidth
D) If switches from different manufacturers are interconnected, the switches should be configured to follow the same port cost standard as much as possible, otherwise the spanning tree calculation results may deviate from the original intention of the network design.
3. In a certain network, it is planned to use an S5560 switch as a RADIUS client and two iMC servers as RADIUS servers to complete the user's secure authentication access. Which of the following statements is correct? (Multiple choice)
A) If the two iMC servers can adopt the master-slave mode, then the two RADIUS server IP addresses configured on the S5560 must be the same
B) When configuring the S5560, ensure that the device can communicate with the iMC server.
C) By default, the IP address of the RADIUS server on the S5560 is 192.168.1.1
D) Two iMC servers cannot work in master-slave mode
4. Which of the following descriptions of Openflow are incorrect? (Multiple choice)
A) OpenFlow uses TCP port number 6622
B) The main components of openFlow include OpenFlow controller and OpenFlow switch
C) OpenFlow instance types can be divided into global instances, VLAN instances, and interface instances.
D) The priority of the Table Miss entry is 65535
5. In SDN networks, which of the following problems exist in the traditional network security deployment method? (Multiple choice)
A) In Overlay networking, network devices need to detect inner messages through Overlay encapsulation
B) The coupling between network devices is large and the topology is seriously dependent.
C) Security equipment capabilities cannot be shared among multiple services
D) Data packets need to be classified multiple times, which is inefficient.
Solutions:
| Question # 1 Answer: A,B,D | Question # 2 Answer: A,B,C,D | Question # 3 Answer: B,C | Question # 4 Answer: A,D | Question # 5 Answer: A,B,D |
It is very a good dumps. It is same with real exam. best dumps without one of. the only.
I did it. It is a good dumps. You are worth having. Good help for examination.
Dumps are the latest as they say. It is nearly same with real examination. Pass without doubt
I advise you to purchase this study guide. Very good. 70% questions are same with real exam
It is the best accurate and valid. I choose TestSimulate because I think their customer is the best at first, now I know the GB0-372-ENU exam dumps are good too. Pass! Yeh...
Based on my experience, the real questions for GB0-372-ENU is valid and accurate. I pass exam. HAPPY
Disclaimer Policy: The site does not guarantee the content of the comments. Because of the different time and the changes in the scope of the exam, it can produce different effect. Before you purchase the dump, please carefully read the product introduction from the page. In addition, please be advised the site will not be responsible for the content of the comments and contradictions between users.
TestSimulate GB0-372-ENU practice test engine provide users the most accurate exam materials so that users can have a good learning about your exam. Most examinees choose our practice test engine as their only exam materials and pass exam successfully. Our high-quality GB0-372-ENU practice test engine should be helpful for every user if you pay attention on our exam questions. Every penny will be worth.
Or if you are afraid, we have money back guarantee policy that if you fail exam after purchasing our GB0-372-ENU practice test engine, we will full refund to you soon if you send us your failure score scanned and apply for refund. No Pass, Full Refund!
Yes, our GB0-372-ENU exam questions are certainly helpful practice materials. Our pass rate is 99%. Our GB0-372-ENU exam questions are compiled strictly. Our education experts are experienced in this line many years. We guarantee that our materials are helpful and latest surely. If you want to know more about our products, you can download our PDF free demo for reference. Also we have pictures and illustration for Self Test Software & Online Engine version.
All our products are the latest version. If you want to know details about each exam materials, our service will be waiting for you 7*24*365 online. Our exam products will updates with the change of the real GB0-372-ENU test. It is different for each exam code.
All our products can share 365 days free download for updating version from the date of purchase. So don't worry. The exam materials will be valid for 365 days on our site.
We have professional system designed by our strict IT staff. Once the GB0-372-ENU exam materials you purchased have new updates, our system will send you a mail to notify you including the downloading link automatically, or you can log in our site via account and password, and then download any time. As we all know, procedure may be more accurate than manpower.
No. After purchase, our system will set up an account and password by your purchasing information. You can use it directly or you can change your password as you like. No need to register an account yourself.
Yes, we have money back guarantee if you fail exam with our products. Applying for refund is simple that you send email to us for applying refund attached your failure score scanned. Money will be back to what you pay. Normally we support Credit Card for most countries. Our refund validity is 60 days from the date of your purchase. Our customer service is 365 days warranty. Users can receive our latest materials within one year.
Self Test Software should be downloaded and installed in Window system with Java script. After purchase, we will send you email including download link, you click the link and download directly. If your computer is not the Window system and Java script, you can choose to purchase Online Test Engine. It is available for all device such Mac.
Yes, you can choose PDF version and print out. PDF version, Self Test Software and Online Test Engine cover same questions and answers. PDF version is printable.
Self Test Software can be downloaded in more than two hundreds computers. It is no limitation for the quantity of computers. So does Online Test Engine. You can use Online Test Engine in any device.
Over 73358+ Satisfied Customers